스위치 케이스에서 더 많은 경우 실행 MATLAB

Question

사용자 입력을 기반으로 스크립트의 특정 부분으로 이동 한 다음 거기에서 계속 진행하고 그 후에 전체 스크립트를 실행하려고합니다. 나는 스위치 케이스를 사용하여 구현을 시도했지만 문제는 matlab의 스위치 케이스에서 명시 적으로 break를 호출하지 않을 때 다음 케이스로 넘어 가지 않는다는 것이다. 그러나 내 프로그램 논리는 내가 사건에 가야하고, 그 사건을 포함한 모든 사건을 실행해야한다는 것이다. MATLAB에서 어떻게 이것을 할 수 있습니까?

여기 참조를 위해 내 스크립트입니다 : -

clear all; 
close all; 
clc; 

disp('This is a script to do the back projection for an event given the required input files.'); 
disp('Please make sure you have copied all of the following files into the ./back_projection/data directory:-'); 
disp(' '); 
disp('1. V_{array}.txt - File containing the velocity data of all the stations selected from the array in one single column'); 
disp('2. T_{array}.txt - FIle containing the corresponding time data for rall the stations selected from the array in one single column'); 
disp('3. P_time_{array} - File containing the P wave arrival time of the event at all all the selected stations of the array'); 
disp('4. stnlat_{array} - File containing the station latitudes of all the stations selected from the array'); 
disp('5. stnlong_{array} - File containing the station longitudes of all the stations selected from the array'); 
disp('6. data_info_{array}.txt - File containing the GCARC, AZ and BAZ of the event at all the stations selected from the array'); 
disp(' '); 
input('Continue? (After making sure, press enter)','s'); 
clc 

disp('Choose from where to start processing :-'); 
disp('0. Generate grid (Start from the beginning)'); 
disp('1. Station check'); 
disp('2. Cross correlation'); 
disp('3. Rupture back projection'); 
disp('4. Net stack alignment'); 
disp('5. Cumulative plot of energy'); 
disp('6. Plot of energy peaks at each second'); 
disp('7. Saving movie frames'); 
disp('8. Run a movie test'); 
disp('9. Stack plots for STF calculation'); 
disp('10. STF plot & calculation'); 
disp('11. Stack plots for plotting earthquake traces'); 
disp('12. Plot of all earthquake traces'); 
disp(' '); 
listener=input('Enter your choice: '); 
clc 

switch listener 
%% Starting back projection 
    case 0 
    delete array.txt; 
    cd back_projection; 
    gridgen; 
    save variables/vars0; 
    opts=input('Do you want to quit the program? (y/n)','s'); 
    if(opts=='y') 
     return 
    end 

    case 1 
    case 2 
    case 3 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    clear; 
    load variables/vars0; 
    o='y'; 

    a_arr = []; 
    increment = 0; 

    while(strcmpi(o,'y')) 
     array = input('Enter array: ','s'); 
     disp(' '); 
     disp('Station Check...'); 
     station_check; 
     save variables/vars1; 
     opts=input('Do you want to quit the program? (y/n)','s'); 
     if(opts=='y') 
      return 
     end 
     clear; 
     load variables/vars1; 
     increment = increment+1; 
     a_arr = [a_arr;array]; 
     disp(' '); 
     disp('Cross Correlation...'); 
     Crosscorrelation; 
     save variables/vars2; 
     opts=input('Do you want to quit the program? (y/n)','s'); 
     if(opts=='y') 
      return 
     end 
     clear; 
     load variables/vars2; 
     disp(' '); 
     disp('Back Projection...') 
     rupture_back_projection; 
     save variables/vars3; 
     opts=input('Do you want to quit the program? (y/n)','s'); 
     if(opts=='y') 
      return 
     end 
     clear; 
     load variables/vars3; 
     o = input('Do you want to enter more arrays (y/n)? ','s'); 

    end 

    cd ..; 
    fid = fopen('array.txt','w'); 
    for j = 1:increment 
     fprintf(fid,'%s \n',a_arr(j,:)); 
    end 
    fclose(fid); 
    cd back_projection; 
    %% 
    case 4 
    load variables/vars3; 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    disp(' '); 
    disp('Aligning all the arrays...'); 
    net_stack_align; 
    save variables/vars4; 
    opts=input('Do you want to quit the program? (y/n)','s'); 
    if(opts=='y') 
     return 
    end 
    case 5 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    clear; 
    load variables/vars4; 
    %% 
    input('Close the plot and press enter'); 
    disp(' '); 
    disp('Doing a cumulative plot of the energy in the provided time window...'); 
    start_win = input('Enter the starting time of the window: '); 
    end_win = input('Enter the closing the of the window: '); 
    cumulative_plot(b_corr,e_lat,e_long,start_win,end_win,ev_lat,ev_long); 
    input('Close the plot and press enter'); 
    save variables/vars5; 
    opts=input('Do you want to quit the program? (y/n)','s'); 
    if(opts=='y') 
     return 
    end 
    case 6 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    clear; 
    load variables/vars5; 
    %% 
    disp(' '); 
    disp('Plotting the energy peak at all points in time (secs) within the time window...'); 
    end_win = input('Enter the closing time of the window (window starts from 1 second): '); 
    peak_time_wise(b_corr,e_lat,e_long,end_win,ev_lat,ev_long); 
    input('Close the plot and press enter'); 
    save variables/vars6; 
    opts=input('Do you want to quit the program? (y/n)','s'); 
    if(opts=='y') 
     return 
    end 
    case 7 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    clear; 
    load variables/vars6; 

    disp(' '); 
    disp('Saving movie frames ...'); 
    movie_slices(b_corr, e_lat, e_long, bp_l, bp_u); 
    disp('Saved'); 
    save variables/vars7; 
    opts=input('Do you want to quit the program? (y/n)','s'); 
    if(opts=='y') 
     return 
    end 

    case 8 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    clear; 
    load variables/vars7; 
    %% 
    disp(' '); 
    disp('Running a movie test'); 
    frameskip = input('Enter the number of frames to skip for testing: '); 
    movie_test(b_corr,e_lat,e_long,bp_l,bp_u,frameskip); 
    input('Close the plot and press enter'); 
    save variables/vars8; 
    opts=input('Do you want to quit the program? (y/n)','s'); 
    if(opts=='y') 
     return 
    end 

    case 9 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    clear; 
    load variables/vars8; 

    %% Miscellaneous Calculations 
    disp(' '); 
    disp('Back Projection has been done. Starting miscellaneous calculations.'); 
    disp('STF calculation...'); 
    o='y'; 

    while(strcmpi(o,'y')) 
     array=input('Enter the array: ','s'); 
     stack_plot; 
     movefile(fullfile('output',['stack_uncorr_',num2str(bp_l),'_',num2str(bp_u),'Hz_',array,'.txt']),fullfile('output',['stack_uncorr_',num2str(bp_l),'_',num2str(bp_u),'Hz_',array,'_stf.txt'])); 
     movefile(fullfile('output',['stack_corr_',num2str(bp_l),'_',num2str(bp_u),'Hz_',array,'.txt']),fullfile('output',['stack_corr_',num2str(bp_l),'_',num2str(bp_u),'Hz_',array,'_stf.txt'])); 
     save variables/vars9; 
     opts=input('Do you want to quit the program? (y/n)','s'); 
     if(opts=='y') 
      return 
     end 
     clear; 
     load variables/vars9; 
     o=input('Do you want to enter more arrays? (y/n) ','s'); 
    end 
    case 10 
    loadd variables/vars9; 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    STF_calc; 
    input('Close the plot and press enter'); 
    save variables/vars10; 
    opts=input('Do you want to quit the program? (y/n)','s'); 
    if(opts=='y') 
     return 
    end 
    case 11 
    case 12 
    path=strsplit(pwd,'\'); 
    pathcheck=strcmp(cell2mat(path(end)),'back_projection'); 
    if (pathcheck==0) 
    cd back_projection; 
    end 
    clear; 
    load variables/vars10; 
    %% 
    disp(' '); 
    disp('Plotting earthquake traces...'); 
    o='y'; 
    while(strcmpi(o,'y')) 
     array=input('Enter the array: ','s'); 
     stack_plot; 
     trace_plot; 
      save variables/vars11; 
     opts=input('Do you want to quit the program? (y/n)','s'); 
     if(opts=='y') 
      return 
     end 
     clear; 
     load variables/vars11; 
     o=input('Do you want to enter more arrays? (y/n) ','s'); 
    end 
end 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
% To add any additional scripts, put the scripts in the './back_projection' 
% directory and then insert the script call in this section below. 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
disp(' '); 
disp('Process completed'); 
cd ..; 

Answer 1

내 선호 된 접근이이 코드를 읽기 수 있다는 추가적인 장점이있는, (함수로 가능 local functions 또는 private functions를 코드를 분리하는 것입니다, 그리고 나서 각 함수의 끝에 함수가 리턴되기 전에 시퀀스의 다음 함수를 호출하도록하십시오.

이렇게하면 정확히 캐스케이드가 생성되고 기본 스크립트에는 switch 문만 있으면됩니다. '캐스 캐 이드 (cascade)'에서 특정 단계에 적절한 함수를 호출합니다. '.

예컨대 :

function main_function(Input) 
    switch(Input) % assumes appropriate Input checks and sanitization has occured 
    case 1; step1_generate_grid(); 
    case 2; step2_station_check(); 
    case 3; step3_cross_correlation(); 
    case 4; step4_etc_etc(); 
    otherwise; disp('Nothing to perform'); 
    end 
end 

function step1_generate_grid() 
    disp('Generating Grid...'); 
    step2_station_check(); % Go to next step in cascade 
end 

function step2_station_check() 
    disp('Checking station...'); 
    step3_cross_correlation(); % Go to next step in cascade 
end 

function step3_cross_correlation() 
    disp('Performing cross-correlation...'); 
    step4_etc_etc(); % Go to next step in cascade 
end 

function step4_etc_etc() 
    disp('Performing final steps etc...'); 
    % Final step in cascade, no further functions to call. 
end