시간 동기화를 위해 ntp 클라이언트를 사용하는 VM이 있습니다. 다음은 내 설정입니다. 제 질문은 클라이언트 ntp.conf 파일에 server 127.127.1.0 # local clock
라인이 필요합니까? 그렇다면 왜?NTP 클라이언트 제한없는 지역 시계
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
# Permit all access over the loopback interface.
restrict 127.0.0.1
restrict -6 ::1
server ntp1.example.com
server ntp2.example.com
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available.
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
driftfile /var/lib/ntp/drift
그것은 모든 의견에 : 그것은 대체 소스로 의도 (지층 = 10 개 수단 : 낮은 품질, 선호하지 않음) 당신은 ntpdc'와 실제 클럭 소스를 확인하실 수 있습니다 - p는 괜찮은 매뉴얼 페이지도 가지고있다. – wildplasser
내 고객 측에서 정말 필요합니까? – Satish
VM의 특성을 모르겠습니다. 정상적인 컴퓨터에서는 폴트 백 장치로 불량 지층 로컬 클럭을 사용하는 것이 그리 좋지 않습니다. 특히 드리프트가 안정되면 더욱 그렇습니다. 그러나 VM의 경우 HW 클럭 (대략 20 분 정도)에 대한 쓰기가 영구적이거나 단순한 오류는 아닙니다. 어쨌든 : 네트워크 클럭 소스는 항상 필요합니다 (그리고 일단 존재하면 선호됩니다) – wildplasser