1
죄송합니다. 미리보기 창에 줄 바꿈이 나타나지 않는 것 같습니다. 이 출력을 실행할 때 sudo cpan Scalar::Util::Numeric; 제스, 조쉬.Scalar :: Util :: Numeric이 올바르게 설치되지 않는 이유는 무엇입니까?
[email protected]:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$ sudo cpan Scalar::Util::Numeric [sudo] password for jmm: CPAN: Storable loaded ok Going to read /home/jmm/.cpan/Metadata Database was generated on Tue, 09 Sep 2008 16:02:51 GMT CPAN: LWP::UserAgent loaded ok Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/authors/01mailrc.txt.gz Going to read /home/jmm/.cpan/sources/authors/01mailrc.txt.gz Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/modules/02packages.details.txt.gz Going to read /home/jmm/.cpan/sources/modules/02packages.details.txt.gz Database was generated on Tue, 16 Sep 2008 16:02:50 GMT There's a new CPAN.pm version (v1.9205) available! [Current version is v1.7602] You might want to try install Bundle::CPAN reload cpan without quitting the current session. It should be a seamless upgrade while we are running... Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/modules/03modlist.data.gz Going to read /home/jmm/.cpan/sources/modules/03modlist.data.gz Going to write /home/jmm/.cpan/Metadata Running install for module Scalar::Util::Numeric Running make for C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz CPAN: Digest::MD5 loaded ok Checksum for /home/jmm/.cpan/sources/authors/id/C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz ok Scanning cache /home/jmm/.cpan/build for sizes Scalar-Util-Numeric-0.02/ Scalar-Util-Numeric-0.02/Changes Scalar-Util-Numeric-0.02/lib/ Scalar-Util-Numeric-0.02/lib/Scalar/ Scalar-Util-Numeric-0.02/lib/Scalar/Util/ Scalar-Util-Numeric-0.02/lib/Scalar/Util/Numeric.pm Scalar-Util-Numeric-0.02/Makefile.PL Scalar-Util-Numeric-0.02/MANIFEST Scalar-Util-Numeric-0.02/META.yml Scalar-Util-Numeric-0.02/Numeric.xs Scalar-Util-Numeric-0.02/ppport.h Scalar-Util-Numeric-0.02/README Scalar-Util-Numeric-0.02/t/ Scalar-Util-Numeric-0.02/t/pod.t Scalar-Util-Numeric-0.02/t/Scalar-Util-Numeric.t Removing previously used /home/jmm/.cpan/build/Scalar-Util-Numeric-0.02 CPAN.pm: Going to build C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Scalar::Util::Numeric cp lib/Scalar/Util/Numeric.pm blib/lib/Scalar/Util/Numeric.pm AutoSplitting blib/lib/Scalar/Util/Numeric.pm (blib/lib/auto/Scalar/Util/Numeric) /usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap Numeric.xs > Numeric.xsc && mv Numeric.xsc Numeric.c cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/usr/lib/perl/5.8/CORE" Numeric.c In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:420:24: error: sys/types.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:451:19: error: ctype.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:463:23: error: locale.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:480:20: error: setjmp.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:486:26: error: sys/param.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:491:23: error: stdlib.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:496:23: error: unistd.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:776:23: error: string.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:925:27: error: netinet/in.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:929:26: error: arpa/inet.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:939:25: error: sys/stat.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:961:21: error: time.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:968:25: error: sys/time.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:975:27: error: sys/times.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:982:19: error: errno.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:997:25: error: sys/socket.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1024:21: error: netdb.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1127:24: error: sys/ioctl.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1156:23: error: dirent.h: No such file or directory In file included from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/syslimits.h:7, from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:11, from /usr/lib/perl/5.8/CORE/perl.h:1510, from Numeric.xs:2: /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:122:61: error: limits.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:2120, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/handy.h:136:25: error: inttypes.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:2284, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/unixish.h:106:21: error: signal.h: No such file or directory In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2421:33: error: pthread.h: No such file or directory In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2423: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_os_thread’ /usr/lib/perl/5.8/CORE/perl.h:2424: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_mutex’ /usr/lib/perl/5.8/CORE/perl.h:2425: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_cond’ /usr/lib/perl/5.8/CORE/perl.h:2426: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_key’ In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51, from /usr/lib/perl/5.8/CORE/perl.h:2733, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlio.h:65:19: error: stdio.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51, from /usr/lib/perl/5.8/CORE/perl.h:2733, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlio.h:259: error: expected ‘)’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:262: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:265: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:268: error: expected declaration specifiers or ‘...’ before ‘FILE’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2747, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/sv.h:389: error: expected specifier-qualifier-list before ‘DIR’ In file included from /usr/lib/perl/5.8/CORE/op.h:497, from /usr/lib/perl/5.8/CORE/perl.h:2754, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/reentr.h:72:20: error: pwd.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:75:20: error: grp.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:85:26: error: crypt.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:90:27: error: shadow.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/op.h:497, from /usr/lib/perl/5.8/CORE/perl.h:2754, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/reentr.h:612: error: field ‘_crypt_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:620: error: field ‘_drand48_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:624: error: field ‘_grent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:635: error: field ‘_hostent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:654: error: field ‘_netent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:669: error: field ‘_protoent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:684: error: field ‘_pwent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:695: error: field ‘_servent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:710: error: field ‘_spent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:721: error: field ‘_gmtime_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:724: error: field ‘_localtime_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:771: error: field ‘_random_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:772: error: expected specifier-qualifier-list before ‘int32_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2756, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/av.h:13: error: expected specifier-qualifier-list before ‘ssize_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2759, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/scope.h:232: error: expected specifier-qualifier-list before ‘sigjmp_buf’ In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2931: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getuid’ /usr/lib/perl/5.8/CORE/perl.h:2932: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘geteuid’ /usr/lib/perl/5.8/CORE/perl.h:2933: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getgid’ /usr/lib/perl/5.8/CORE/perl.h:2934: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getegid’ In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:3238:22: error: math.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:3881, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/thrdvar.h:85: error: field ‘Tstatbuf’ has incomplete type /usr/lib/perl/5.8/CORE/thrdvar.h:86: error: field ‘Tstatcache’ has incomplete type /usr/lib/perl/5.8/CORE/thrdvar.h:91: error: field ‘Ttimesbuf’ has incomplete type In file included from /usr/lib/perl/5.8/CORE/perl.h:3883, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected specifier-qualifier-list before ‘time_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:3950, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘mode_t’ /usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘uid_t’ /usr/lib/perl/5.8/CORE/proto.h:297: error: expected declaration specifiers or ‘...’ before ‘off64_t’ /usr/lib/perl/5.8/CORE/proto.h:299: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_sysseek’ /usr/lib/perl/5.8/CORE/proto.h:300: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_tell’ /usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘gid_t’ /usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘uid_t’ /usr/lib/perl/5.8/CORE/proto.h:736: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_my_fork’ /usr/lib/perl/5.8/CORE/proto.h:1020: error: expected declaration specifiers or ‘...’ before ‘pid_t’ /usr/lib/perl/5.8/CORE/proto.h:1300: error: expected declaration specifiers or ‘...’ before ‘pid_t’ /usr/lib/perl/5.8/CORE/proto.h:1456: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/proto.h:2001: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_read’ /usr/lib/perl/5.8/CORE/proto.h:2002: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_write’ /usr/lib/perl/5.8/CORE/proto.h:2003: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_unread’ /usr/lib/perl/5.8/CORE/proto.h:2004: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_tell’ /usr/lib/perl/5.8/CORE/proto.h:2005: error: expected declaration specifiers or ‘...’ before ‘off64_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:3988, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_thr_key’ /usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_op_mutex’ /usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_dollarzero_mutex’ /usr/lib/perl/5.8/CORE/perl.h:4485:24: error: sys/ipc.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:4486:24: error: sys/sem.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:4611:24: error: sys/file.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perlapi.h:38, from /usr/lib/perl/5.8/CORE/XSUB.h:349, from Numeric.xs:3: /usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:238: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:239: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:240: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token In file included from /usr/lib/perl/5.8/CORE/perlapi.h:39, from /usr/lib/perl/5.8/CORE/XSUB.h:349, from Numeric.xs:3: /usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token In file included from Numeric.xs:4: ppport.h:3042:1: warning: "PERL_UNUSED_DECL" redefined In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:163:1: warning: this is the location of the previous definition Numeric.c: In function ‘XS_Scalar__Util__Numeric_is_num’: Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:22: error: invalid type argument of ‘unary *’ Numeric.c:24: error: invalid type argument of ‘unary *’ Numeric.xs:16: error: invalid type argument of ‘unary *’ Numeric.xs:17: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.c:36: error: invalid type argument of ‘unary *’ Numeric.c:36: error: invalid type argument of ‘unary *’ Numeric.c: In function ‘XS_Scalar__Util__Numeric_uvmax’: Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:45: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.c:51: error: invalid type argument of ‘unary *’ Numeric.c:51: error: invalid type argument of ‘unary *’ Numeric.c: In function ‘boot_Scalar__Util__Numeric’: Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:65: error: invalid type argument of ‘unary *’ Numeric.c:65: error: invalid type argument of ‘unary *’ Numeric.c:66: error: invalid type argument of ‘unary *’ Numeric.c:66: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ make: *** [Numeric.o] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible [email protected]:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$
"는 미리보기 창에 표시되지 않은 줄 바꿈 것 같습니다."예, 왼쪽에있는 포맷 지침은 앞에 4 공백이나 탭을 삽입해야한다고 각 줄을 코드 블록으로 만듭니다. 처음 들여 쓰기를 위해 편집기에 붙여 넣으면이 작업을 매우 쉽게 할 수 있습니다. –